Build Your Trailer
Draw your trailer before you buy it
Pick your equipment, arrange it on a to-scale floor plan, and see it in 3D. As you build, we run the same code checks our shop runs — so you find out what your layout needs while it's still free to change.
- To-scale, in real inches
- Live code checks as you build
- Free, no signup, no price gate
Free · nothing to install · no price gate
Build your trailer
Pick a starting point, drag your equipment onto the floor plan, then look at it in 3D. As you build, we run the same code checks our shop runs — hood coverage, tank sizes, propane, amps, axle weight, walkway clearance.
Equipment
Every trailer we build is 8 ft wide. It is the width that tows, parks and passes without an escort, so we do not vary it.
Drag to move. Drop near a wall to snap it. R rotates the selected piece, Del removes it.
Your spec sheet
Your numbers
Code checks
What's in it
Four minutes, start to spec sheet
How it works
Start from a build we've done before
Six starting points — taco, birria, BBQ, coffee, raspa, pizza — each one the equipment list off a trailer we've actually built, on the length that menu usually needs. You can strip it back to nothing and start over.Drag real equipment, not icons
Every piece in the catalog carries its real footprint in inches, its connected load in BTU or watts, and its installed weight. A 48-inch plancha takes 48 inches of wall, not "one unit" of space. That's why the plan tells you something true about whether your menu fits in 16 feet.Watch the code checks change as you build
Add a fryer and the hood requirement appears with a span in inches. Add a second one and the Class K extinguisher line shows up. Push service hours to 14 and the tank sizes climb. Nothing is hidden until the end.Send the spec, not a guess
One button drops the whole spec sheet into the quote form — equipment list, dimensions, water, gas, electrical, weight and every open code item. We reply to that with real answers instead of "depends."
The part nobody else's configurator does
What the code checks actually check
A 3D picture is easy. Knowing what makes the picture fail plan review is the part that took us years of builds to learn. These run live.
| Check | What it tells you |
|---|---|
| Type I hood | Span in inches over the grease-producing line, and whether your appliances are grouped tight enough for one hood or split across two. |
| Fresh & waste water | Sized off your service hours, with the waste tank at least 15% larger than fresh — the ratio in FDA Food Code 5-401.11(A) that both Texas and Colorado adopt. |
| Propane | Total connected BTU/hr, cylinder bay capacity, and the 200 lb aggregate limit that decides whether you need a different tank layout. |
| Electrical | Draw per leg against the 50 A 120/240 V inlet we build into every trailer, and against the 40 A continuous ceiling the code sets for anything running three hours or more. You find out here rather than the first time you run the fryer and the A/C together. |
| Weight & axles | Equipment weight plus water plus propane plus the trailer, checked against single- and tandem-axle ratings. This is the one that quietly ruins builds. |
| Walkway | Clear aisle between your cook line and the opposite wall, with two people working in it. |
| Colorado items | Switch the state and the altitude-orifice, freeze-protection and LP-gas alarm items appear, because Colorado adopts IFGC 2021 statewide. |
Your build becomes your quote request
Then send it to us
Everything you laid out — equipment, dimensions, water, gas, electrical, weight and every open code item — travels with the form. You get an answer from someone who has read your actual layout, not a price list.
Questions about the configurator
Does the configurator give me a price?
Is what I build actually buildable?
Do I have to give you my information to use it?
Can I come back to what I built?
Will the code checks keep me out of trouble with my inspector?
What if I don't know what equipment I need?
Keep going
Start selling before you finish paying.
Tell us what you're going to sell and we'll send back a floor plan and a weekly payment — no obligation, no credit pull.